LFS 0.6B Pro Tweak v1.4 [Update 18.07.2011: V1.4.1]


This program gives you the ability to edit all LFS 0.6B cars.

Features:
-Save/Load All values in a file or Save/Load just a part of the values.
-Load older patches tweak files (0.5Z30/Z31 / 0.5Z34 / 0.6A1 / 0.6A2/A3/A4)
-Edit all possible at this moment cars characteristics.
-Wheels values converter from real life values to lfs tweaking values.
-Update detection.

Update 18.07.2011: V1.4.1
Change log:
-works offline(without network connection)

Thanks to "TheTime" for coding this awesome and exclusive Tweak Program for LFS 0.6B.
Requires Microsoft .NET Framework 3.5  or the newest .NET to work.

How to use it:
1. Download and Unzip the file linked below anywhere in your computer.
2. Run the game and the .exe file from the archive.
3. Write the new values in the program boxes and click the "Update Values !" button to send the values to LFS.
4. Go back to LFS and Check your new car.


Downloads:

200 comments:

  1. Is there a place where there is an explanation about what the different fields do? I am specifically interested in the engine power/torque 1, 2 and 3 fields. I had to convert to Pro Tweak from LFSTweak after the 0.6B release (it didn't work and I think he's not working on it anymore). Therefore, I downloaded Pro Tweak, and there are subtle differences that I am trying to reconcile. Thanks!

    ReplyDelete
  2. LFSTweak.net Power=LFS-Tweak.com Power & Torque 1
    LFSTweak.net Torque=LFS-Tweak.com Power & Torque 2
    LFS-Tweak.com Power & Torque 3=LFSTweak.net nothing...it doesn't exist in that tweak.

    If you need more help...just ask.

    ReplyDelete
  3. i just downlaod its working good thanks but i go to do my car up and then i some how start flying and doing flips and my car will not start please email me telling me what im doing rong anakin-bishop@hotmail.com

    ReplyDelete
  4. my min/max gears dont work, how can i fix that?

    ReplyDelete
  5. min/max gears on what cartype?...make sure you are counting the number of gears you want starting from the reverse gear. Example: if you want your car to have 6 gears you have to write 8 in the tweak which means 6 forward gears + reverse gear + neutral gear.

    ReplyDelete
    Replies
    1. what about cartype 2??....how to add number of gears??

      Delete
    2. do you need a license? s1 or s2?

      Delete
  6. Please make it so we can edit turbo pressure with decimals. Now it will only accept 0,1,2 and 3. Not 1.2 or so.

    ReplyDelete
  7. @Gaby
    i know , i want 7 gears so i enter 9 but it stays 5 gears.
    As far as i know it is with cartype 1, 2 and 4, havent tried the rest yet

    ReplyDelete
  8. @Anonymous
    Decimal values are totally accepted for turbo pressure. Be sure to use a point . and not a coma ,
    @Snejtueg
    For exemple i you want 7 gears on cartype 2, you will need to enter 9 in max & min gears.

    ReplyDelete
  9. @TheTime
    Hah thx i only entered 9 in max gears xp

    ReplyDelete
  10. yo, this might be a bug but every time i click update values in a mod server example in the [DUB] mod server i always loose connection and i dont edit nothing except for the power and then when i go to re enter it says cars dont match host cars???
    i dont get it lol

    ReplyDelete
  11. It is because the patch 0.6 servers don't work with multimod.

    ReplyDelete
  12. how will i be able to use this tweak without getting kicked from 0.6 servers?

    ReplyDelete
  13. there is no way to play on multimod servers with any tweak in this world.

    ReplyDelete
  14. You can't edit all cars? :< Just XFG XRG and FBM? At least I haven't yet figured out how to tweak others...

    ReplyDelete
  15. how do you use this joule to tire width converter ?

    i cant find the joule value of car tires :S

    ReplyDelete
  16. tires are exactly like in real life...Example: 245 width=0.245 in lfs and height 55 is 0.55 in lfs.

    ReplyDelete
  17. Hi,

    I think i need a little help with one of the engines i try to build up.
    I want to build a Turbocharged 1.4 engine
    The engine values are:
    Engine: Volkswagen 1.4 TSI
    Power: 122HP at 5000rpm
    Torque: 200NM from 1500 - 4000rpm
    Redline: 6000 rpm
    Cubic Capacity 1390CC
    Is it possible to build such a kind of engine with this tool?
    It´s Cause if I try to build this engine i get something like that:
    Power: 122HP at 5810rpm
    Torque: 200NM at 1500rpm
    So is it possible to get the 122HP closer to 5000rpm?
    I think the problem is that the 200NM are only at 1500rpm not from 1500 to 4000rpm...right?

    I would be very grateful for any answer.

    Last but not least sorry for my bad english!

    ReplyDelete
  18. the torque its not 200NM from 1500RPM to 4000RPM. I think its around 200NM between that 2 RPM values. Torque is normally growing till an RPM values and than decreasing...so the torque in that car is growing to 200NM @ 1500RPM and than growing slowly to 2xxNM between the 2 RPM values and decreasing too till it gets to 200NM @ 4000RPM. Try to put 200NM @ ~2500-3000RPM or more. If you can't get the HP to 5000rpm after you edit the torque rpm...give me the values you wrote in the tweak and I'll try to help you.

    ReplyDelete
  19. Thanks for your quick answer!

    At first I tought you were right with your idea about the torque, but then I found this performance diagram:
    http://data.motor-talk.de/data/galleries/0/51/5132/36751362/1-4tsi-6413966664598853644.png

    in this diagram the engine has the maximum torque of 200NM from 1500 to 4000rpm
    I think that is caused through the Turbo.
    I want to know how the LFS-Developers built the Scirocco 2.0TSI Engine.
    The values of the 2.0 TSI engine are:
    Power: 200PS from 5100 to 6000rpm
    Torque: 280NM from 1700 to 5000rpm

    But back to my little problem.
    I have built a new 1.4TSI Engine:
    Power: 122PS at 5012rpm
    Torque: 200NM at 3645rpm
    But i think this is not a turbocharged engine anymore it looks more like a normal engine and not like a turbocharged engine. This engine reaches the maximum torque too late.

    My tweak values:
    XFG with default CarType 2 values
    Cubic Capacity: 1390,4
    Engine Power and Torque 1: 0,763
    Engine Power and Torque 2: 0,38
    Engine Power and Torque 3: 0,705
    Turbo Set to On
    Turbo Pressure: 0,4
    Turbo Lag: 0,2
    Redline: 610,75

    Do you got another idea to solve my problem
    with the TSI engine?

    ReplyDelete
    Replies
    1. when i update my values, its says "one value missing"

      Delete
  20. try to set the turbo lag to 0.001...It will make the turbo pressure grow much faster. about the straight torque line....I think its electronically limited

    ReplyDelete
    Replies
    1. i changed it and it stil isn't working i see this massage is from 2011 so wat do i have to do?

      Delete
  21. I can't get it to work i've turned on LFS and The Tweak and i set everything but it dousn't work? What am i doing wrong??

    ReplyDelete
  22. what exactly is not working? explain a bit more...

    ReplyDelete
  23. Ok, The cars engines dont change, everything is the same when i use the Tweak dousnt change the cars.

    ReplyDelete
  24. make sure you click the update button and you have at least .NET 3.5

    ReplyDelete
  25. When I turn tweak ON, my FPS are very low. Game is slow. Why ?

    ReplyDelete
  26. Oh that's the problem ok now its working, Thanks alot! :D

    ReplyDelete
  27. U cant do 0.3 or 0.1 in the turbo pressure should it be like that?

    ReplyDelete
  28. 1. I don't know why the FPS gets slow...it doesn't happens to me.

    2. The turbo shouldn't be like that you are able to write what value you want. Try to write the value in notepad and than Copy and Paste it on the program using Right Click menu and not CTRL+C/V

    ReplyDelete
  29. Seems like there is a bug with International formats. The program does not accept "," (Norwegian decimal separator) but when I use "." the program craches. All decimal numbers in the program is presented with "," (and can be changed as long as I don't delete the ",". Turbo does not have a decimal and will only accept 1,2 and 3.

    Car type editor is e.g presenting Engine CC min as "2" and Engine CC max as "1" (for cartype 1,2,4 and 10), Engine Power : 5,605194E-45
    Guess it has something to do with International formats.

    Btw, this is the only way I am playing LFS for the moment :)

    ReplyDelete
  30. the cartype problem is because you are not using 0.6B...the rest is an PC language problem.

    ReplyDelete
  31. 1337 downloads :P

    ReplyDelete
  32. Crazy tweak! It is possible to make 10k HP engine and even more! 500 km/h is really awesome)

    Just as a note: sometimes my system (XP x86) is rebooting during the long tweak usage. It is 100% tweak is the cause.
    The other thing is that in non-English OSes another decimal delimiter is used, so that I can't use comma but using 'dot' is throwing exception (when setting some field)

    ReplyDelete
  33. about rebooting...I don't know what to say...if you close the tweak after you get what you want in lfs...does it still reboots?
    to fix the "dot" thing...set the keyboard language to english...ask google how to do it.

    ReplyDelete
  34. I did some testing, and reboot is happens even when tweak app is not running. Seems it depends from a number of changes I did(approx. 30-50 changes).
    About decimal delimiter - my default keyboard language is English and I can't use 'dot'.
    Anyway, thanks for tweak and good luck

    ReplyDelete
  35. System.ArgumentOutOfRangeException: InvalidArgument=Verdi 233 er en ugyldig for SelectedIndex.
    Parameternavn: SelectedIndex
    ved System.Windows.Forms.ComboBox.set_SelectedIndex(Int32 value)
    ved LFS_Tweak.com_06B_Pro_Tweaker.Main.  ()
    ved LFS_Tweak.com_06B_Pro_Tweaker.Main. (Object , EventArgs )
    ved System.EventHandler.Invoke(Object sender, EventArgs e)
    ved System.Windows.Forms.Form.OnLoad(EventArgs e)
    ved System.Windows.Forms.Form.OnCreateControl()
    ved System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
    ved System.Windows.Forms.Control.CreateControl()
    ved System.Windows.Forms.Control.WmShowWindow(Message& m)
    ved System.Windows.Forms.Control.WndProc(Message& m)
    ved System.Windows.Forms.ScrollableControl.WndProc(Message& m)
    ved System.Windows.Forms.ContainerControl.WndProc(Message& m)
    ved System.Windows.Forms.Form.WmShowWindow(Message& m)
    ved System.Windows.Forms.Form.WndProc(Message& m)
    ved System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
    ved System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
    ved System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

    ReplyDelete
    Replies
    1. See the end of this message for details on invoking
      just-in-time (JIT) debugging instead of this dialog box.

      ************** Exception Text **************
      System.ArgumentOutOfRangeException: InvalidArgument=Value of '146' is not valid for 'SelectedIndex'.
      Parameter name: SelectedIndex
      at System.Windows.Forms.ComboBox.set_SelectedIndex(Int32 value)
      at LFS_Tweak.com_06B_Pro_Tweaker.Main.  ()
      at LFS_Tweak.com_06B_Pro_Tweaker.Main. (Object , EventArgs )
      at System.EventHandler.Invoke(Object sender, EventArgs e)
      at System.Windows.Forms.Form.OnLoad(EventArgs e)
      at System.Windows.Forms.Form.OnCreateControl()
      at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
      at System.Windows.Forms.Control.CreateControl()
      at System.Windows.Forms.Control.WmShowWindow(Message& m)
      at System.Windows.Forms.Control.WndProc(Message& m)
      at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
      at System.Windows.Forms.ContainerControl.WndProc(Message& m)
      at System.Windows.Forms.Form.WmShowWindow(Message& m)
      at System.Windows.Forms.Form.WndProc(Message& m)
      at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
      at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
      at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


      ************** Loaded Assemblies **************
      mscorlib
      Assembly Version: 2.0.0.0
      Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
      CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
      ----------------------------------------
      LFS-Tweak.com 0.6B Pro Tweaker
      Assembly Version: 1.4.1.0
      Win32 Version: 1.4.1.0
      CodeBase: file:///C:/Users/Ramuno/Desktop/LFS-Tweak.com0.6BProTweaker/LFS-Tweak.com%200.6B%20Pro%20Tweaker.exe
      ----------------------------------------
      Microsoft.VisualBasic
      Assembly Version: 8.0.0.0
      Win32 Version: 8.0.50727.4927 (NetFXspW7.050727-4900)
      CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
      ----------------------------------------
      System
      Assembly Version: 2.0.0.0
      Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
      CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
      ----------------------------------------

      Delete
  36. Great tweak, but i can't write decimals, even using dot (.) or comma (,)... Once i delete the value for "torque", i can never write "1,6" or "1.6" again...

    ReplyDelete
  37. copy this dot "." using right click menu...not keyboard key combination and paste it into the tweak...it should work like this.

    ReplyDelete
  38. What does Engine Power and Torque 1-3 actually change?! I'm also tryin to rebuild an real engine

    focus rs 500

    and what do i have to change, if i want to set the max torque to a lower rev

    ReplyDelete
  39. Yeah, it would goot to know, what those values exactly do.

    ReplyDelete
  40. An also the functions. How does the it calculate the power and torqu values related to engine cc, cylinder, power and torque 1-3, and turbo stuffz

    ReplyDelete
  41. Hi! This tweak is great!
    I already created a lot of turbo diesel alike engines.

    Is there any chance to activate traction control and abs on my tweaked xfg?

    Best Regards :)

    ReplyDelete
  42. I can't tell you exactly how lfs calculates the hp depending on CC and cylinders number. Same for the power and torque 1,2 & 3. Relatively...the first one increases the HP and its maximum RPM point, the second one is increasing the HP while lowering the torque, the third one I think is increasing the max hp RPM point while lowering the max torque RPM point.

    @pXoTaS Right now I don't have a solution for that...maybe I will find one in the future.

    ReplyDelete
  43. great tweak! thx a lot!

    ReplyDelete
  44. whitch box one does the km/h?

    ReplyDelete
  45. Hi,

    in witch bar to you choose how many gears you want ?? is it in the car type or single car??

    ReplyDelete
  46. in cartype...the gears min and max...set them to how many gears you want +2

    ReplyDelete
  47. none of the boxes sets the km/h...it is auto determined by lfs depending on the power/weight ratio.

    ReplyDelete
  48. There is anybody who could make a tweak table tutorial with describeing the things in table what mean and how could I copy a real car to LFS car. Ex: how could i make the Ken Block Subaru WRX STi 2009 for LFS !

    ReplyDelete
  49. ANY WAY TO USE IN SERVERS ONLINE, DEMO?

    ReplyDelete
  50. only if the one who is hosting the server has the same tweak values

    ReplyDelete
  51. lfsmods drag entered the server, but not to put in values, and others if they can get with mod

    ReplyDelete
  52. as I can find the values ​​of the hosting

    ReplyDelete
  53. sorry...I can't understand what you want to say...

    ReplyDelete
  54. alguien habla español? como puedo entrar a un servidor y tener full speed?

    ReplyDelete
  55. please try to explain once again what you wanted to say in the last comments.

    ReplyDelete
  56. So bugged. I cant get the , back. So f-bad.

    ReplyDelete
  57. Hey! great program!
    but i have one problem/question:
    how do i edit RB4 settings in the tweak and not only XFG XRG and FBM (single car editor)...
    how to edit other cars using single car editor?
    thanks!

    ReplyDelete
  58. You can't. RB4 values are encrypted .

    ReplyDelete
  59. There is anybody who could make a tweak table tutorial with describeing the things in table what mean and how could I copy a real car to LFS car. Ex: how could i make the Ken Block Subaru WRX STi 2009 for LFS !

    ReplyDelete
  60. can't change my XR GT Turbo settings.. weird.

    ReplyDelete
  61. Gabby i just wanted to thank you for this little trick that's all so thank you very much please keep up the good work.

    ReplyDelete
  62. Same problem about number format. How to solve this? Numbers are in weird format, like scientific, others are simply unreal, e.g. Engine Cylinders Mind:93. Wtf? I am running Win 7 64bit, and i have microsoft.net framework 4

    ReplyDelete
  63. strange...its your .exe modified in any way?

    ReplyDelete
  64. I can tell you what each value means. I've been playing with different tweaks and setups for months now and I mastered it to level i believe very few people out there are able to do. I can make absolutely any engine, turbocharged or not, diesel or petrol to sound, drive and have measured performance absolutely identical to real car, up to 0,1 sec precision for any acceleration, from any rev, any gear...etc.

    What each of the engine values do, and you have to understand this, is it changes OTHER values as well. Being able to tweak them to your liking is a very anal and hard job, and takes a lot of practice, it comes natural to me, as it will to you.

    I will now explain to you what each value does, but remember, changing each value will change other values as well, it about ratios between all 3 values when tweaking an engine. Changing each of these values changes the effect of other values as well:
    First of all, ignore the „Engine Power“ values, they're useless as far as I know and don't do anything that other 4 values cant do. This just makes it more complicated, so just ignore it.

    1) Engine and torque 1: what this does is basically increases both the power and torque figures. The higher this value is related to others, the higher your power and torque are.

    2) Engine and torque 2: this basically changes the distance between peak power RPM and peak torque RPM, and it increases overall torque of your engine, related to power. The lower this value, the greater the distance between power and torque peak, and greater the ratio between power and torque gets, and vice versa. So, lets say 0,2 value will have 150hp@6000rpm and 300Nm @ 2000 rpm, and 0,6 value will have 150hp@6000rpm and 190Nm@4000 rpm.

    3) Power and Torque 3: This is to me a very important value, and will see why. What this does is it flattens or sharpens the torque and power curves. The higher the value, smoother and flatter the torque/power curves will be. When making a engine, i suggest you first start with THIS value. If your engine will be something like a turbocharged petrol engine with really flat torque curve, you want a higher value, like 2,5 or 3, and then work other values after this. What this will do is it will make your torque and power curves flat, if you know what i mean. If you want a V-tec type engine, with lots of power at high revs and less power on low revs, then use value like 0,5 to 1. I use values 2,5 to 3 for turbocharghed petrol engines, about 2-2,5 for diesel engines, and 1-1,5 for atmospheric naturally aspirated engines, but again, it not fixed values, you have to play. Sometimes it takes me a couple of hours of tweaking and testing to get the engine absolutely perfectly, because i really am serious about it. NOTE: What this will also do is, the higher this value is, the faster (meaning on lower rpm) and before your turbo will spool up. For example, take and engine with 300 Nm @ 2000 rpm and 140hp @ 4000 rpm, which is your typical 2liter diesel. With value of 1, turbo wont spool up to full boost before 4000 rpm, with value of 3, turbo will spool up almost instantly (if your turbo speed is set to high) at like 1500 rpm. I hope this is clear, I cant explain it simpler.
    4) Engine Torque: What this value does is simply it increased or decreases the rpm height or your torque and power peaks. Higher value puts your power and torque curves higher up, lower values lower down in rpm range. Also what it does it increased torque only with lower values, and decreases torque only with higher values.
    Thats about it, what you have to know, and this is very important, is that EVERY value will change OTHER values and values are VERY sensitive. Go up and down with 0,05 or someting like that. Sometimes you will make your engine almost perfect, but you will want to move your torque peak up for 100 rpm, and you will screw all other things, and have to go all over again. It takes very long time to make a proper perfect tweak and it takes a long time to master this.

    ReplyDelete
    Replies
    1. thank you for taking the time to explain this, it helped me very much :)

      Delete
  65. Someone asked for a 1.4 TSI VW engine. Well, to show you an example, I decided to make it quickly, i took 5 minutes and got it close to right, but I would usually spend hours tweaking it to perfection now. I will leave that to you who is interested.

    First sort out your wheel sizes, weights, weight distributions, tracks, cambers, gear ratios (you can find info by googling), input proper engine displacement (1400 or something ccm) etc.

    Once you do that:

    engine torque: 0,48 (it will change to 0,47999, but ignore that, just input what i tell you)

    power and torque 1: 0,455
    power and torque 2: 0,9
    power and torque 3: 4

    turbo pressure: 2
    turbo lag: 0,02

    rev limit: 680


    This should be close to right, but again, take time to perfect it.

    ReplyDelete
  66. Thank you very much for your support. I am glad to have people like you on this website and I would like to post your comment on the main page as a tutorial but only if you agree and you give me your nickname for credits.

    ReplyDelete
  67. Thanks for the tweak - its a HUGE help to keeping LFS interesting as it certainly is the best physics engine around...

    Are there plans to make ALL the cars open for tweaking or just the 3 currently available (XF, XR & FBM)?

    Also - is there a way to increase tyre grip? I can now make the cars very fast but grip is now a problem as the XR was never meant to hit 280 down blackwood back straight :P

    ReplyDelete
  68. No plans for more cars...the other cars than the demo ones are crypt-ed.
    Use slicks for more grip.

    ReplyDelete
  69. ok cool no problem.

    Sorry - but how do i use slicks? For the XRG the in game options only give me "road - normal"not even semi's... ?

    Also - am i correct in saying that adjusting the tyre sizes using the tweak is just cosmetic, no performance changes?

    Thanks in advance.

    ReplyDelete
  70. tyre size is very effective in performance.
    for slicks: http://www.lfs-tweak.com/2011/06/slickmod-for-06b.html

    ReplyDelete
  71. awesome! Thanks ;)

    ReplyDelete
  72. Ok , i have realy stupid problem
    I cant use "." (dot) , although, like week ago , i was able to use it with no porbs. even all the nubers in tweak showed up with dot , like engine power (0.143) , now it shows up like this ( 0,143) wtf ??? And when i try to change it back to dot (eg: i change turbo boost from 1 to 1.5 ), push the "update values " button , the dot dissapears ( Eg: from 1.5 it becomes 15) . And a worst part is , i cant use "," ??? any help ?

    ReplyDelete
  73. somebody messed with your keyboard language settings...happen to me too and I can't figure out how there were before.

    ReplyDelete
  74. is it just for me,but it doesn't work multiplayer? when i join the track updating the tweak,it says that the car in server,and the car from tweak aren't the same,so i can't join the server? please reply to my email-saulienis@gmail.com

    ReplyDelete
  75. There is problem with wheel sizes, i don't know is it a bug or it's the game it self. As long as i change the rear wheel height, everything looks good, i can make any size i like (tried 20 inch on the XRG just the other day). But as i try to increse front rim height, the center of the rim goes smaller, debending on how higher i make the front wheel compared to the original. And this affects rear wheels as well, which looked good before modifying front rims. So visualy the outer rim looks disconected from the center of the wheel. I know it doesn't affect handling, but it prevents from making higher rims than they originaly are. Is this a tweak bug or game bug? Is there a possibility to fix this? Anyways your tweak is awesome Gaby. Keep up the good work.

    ReplyDelete
    Replies
    1. its a game bug. You can't fix it from what i know...only with modified rims using hex but I don't know much about that.

      Delete
  76. I have a problem. When I try to modify a number, I can't use the comma (,). I can only use the dot (.), so if I enter a value like 0.8 for example, when I press "upload values" it becomes 8.
    I would appreciate if someone can tell me a solution for this.

    ReplyDelete
    Replies
    1. keyboard language settings would fix it but I don't know how exactly.

      Delete
  77. MY PLACE AFTER ALL VALUES ME OUT A POSTER THAT SAYS "ONE VALUES IS MISSING" ALL BUT ALREADY PLACED AND DO NOT LEAVE ME-UPDATE VALUES

    ReplyDelete
    Replies
    1. it means you have left one input box empty

      Delete
  78. http://www.youtube.com/watch?v=fEWei15vqQk&feature=fvwp&NR=1 Jump to 8:55.

    Can i copy that supra ? Sound, performance etc ?

    ReplyDelete
    Replies
    1. there is nothing to copy...that is an stock FZ performance with a vob mod and the sound is taken from a real supra movie.

      Delete
  79. Hi I keep getting this Message when I open the program and I press continue and nothing Happens: InvalidArgument=Value of '233' is not valid for 'SelectedIndex' Parameter name: SelectedIndex What do I do Or am I missing something

    ReplyDelete
  80. Gaby ThanatoS, I have a little question. In fact, it is related to values of torque, hp and rpm needed for that max values.
    So, is there some kind of equations between values to change so I can put exact value of max HP on certain rpm, and max Torque on certain rpm?
    For now, I see that rpm's for both Torque and HP are in some kind of relation and it is pretty hard to make it custom!
    Also, I'd like to know in what relation is redline and how to input max rpm for engine?

    Thanks in advance

    ReplyDelete
    Replies
    1. somebody explained what you need on a comment on 15 of december...the big comment

      Delete
  81. Gaby ThanatoS,

    Here are values wich I need:

    1.
    Power: 130 BHP @ 5500 RPM
    Torque: 150 ft-lb @ 2750 RPM

    2.
    Power: 197 HP @ 5750 RPM
    Torque: 193 ft-lb @ 4000 RPM

    If all is related to engine, it is a 2849ccm V6!

    Tnx...

    ReplyDelete
    Replies
    1. I can't help you with that...you have to find the values yourself...I haven't made a tweak like that for more than an year....you have all the information you need in that comment

      Delete
    2. Gaby, one thing more, is there a possibility to alter the values permanent, or is it just for time when game is modified by your tweaker and after shut down of game, values are default?

      Cheers

      Delete
    3. Values are default after game shut down...only if you know hex you can make them permanent...but you need to know something more which I keep for private using.

      Delete
  82. This comment has been removed by the author.

    ReplyDelete
  83. I finally got it something similar to that what I needed.

    1.
    Engine Torque: 2,58
    Engine Power: 0,178
    Engine Power and Torque 1: 0.4625
    Engine Power and Torque 2: 0.31
    Engine Power and Torque 3: 1
    RedLine: 716,66

    2.
    Engine Torque: 1,72
    Engine Power: 0,15
    Engine Power and Torque 1: 0,77
    Engine Power and Torque 2: 0,49
    Engine Power and Torque 3: 1
    RedLine: 716,66

    But there seems to be a bug with comma (,). I cannot enter it in any box!?!

    ReplyDelete
    Replies
    1. use dot (.) maybe it will work

      Delete
    2. Darth Vader, save the file, open it with notepad and put comma where you need. Then load it ;)

      Delete
  84. Hi there.

    I can't get the tweak work. Can anyone help me?
    As I run the .exe file (tweak06b), it doesn't say anything, and doesn't run exactly. It just gets into the running threads for about half a second (watching the running apps window), and goes away. I've .NET framework 3.5 SP1 for a long-long time (and all the pre-installations), now I also tried to install 4.0, but makes no sense. I've XP 32bit. What's this?

    ReplyDelete
  85. how i make to mods xrr whit lfs tweak i try the type 5 car and it dont work hel me please

    ReplyDelete
  86. I wrote all the new values in the boxes, but when I press update values ! it says One value is missing ! I have triple checked all the boxes there is no value missing!! Any1 else have this problem? Please help this is driving me crazy.

    ReplyDelete
    Replies
    1. Make sure you checked the values in all 3 tabs

      Delete
  87. Please tell me why appear different values in game. I type 100kw and it shows 140 or other. what are the measuremet units? ho\kw\lb-ft.... why 500rpm and not 5000.. Please help me to st this Accord FWD: emmanueldenniss@yahoo.com

    Engine Type V-6
    Engine Block/Cylinder Head
    Displacement (cc) 3471
    Horsepower @ rpm (SAE net) 271 @ 6200
    Torque (lb-ft @ rpm) 254 @ 5000
    Redline 6800

    ReplyDelete
  88. Hi

    I really like this tweak but when I try putting a V6 or above/Straight 6(inline 6) into the XFG, it just shows as V4/flat4/inline 4? Please help ;/

    ReplyDelete
    Replies
    1. And is there any way to use single car editor for xrt/rb4 etc?

      Delete
    2. its because XFG is restricted by cartype 2 values....take a look at CarTypes Editor and see what I'm talking about.

      from what I know you can't edit Cartype 2 cars as single one.

      Delete
  89. Thank you to the tweak. Excellent. Really good work! Well-tuned.

    ReplyDelete
  90. hey is there a editor to change the wheelbase for all cars not just demo cars?

    ReplyDelete
  91. at cartype 2, how can i change the cylinders?
    for xrg i changed to a v8 then i updated the values, but in the game shows a v4. any suggestions?

    ReplyDelete
    Replies
    1. change the min/max values for cartype 2 then change the individual value for single car.

      Delete
    2. thanks a lot! :D

      Delete
  92. Hi!
    Is it possible to convert my old LTC for use in your 0.6B Tweak program?
    I made muuuuch tweaks on myself, i dont want to lose em all...

    ReplyDelete
    Replies
    1. yes it is...you get the values from the old one and write them into the pro tweaker

      Delete
  93. Aw, that will take some time...
    Anyway, thanks for everything (Server, Programs, etc ;) )

    ReplyDelete
  94. Hey guys.. why can I only edit the demo cars? I want to edit XRT but it doesn't let me.. :(

    ReplyDelete
  95. Sorry for my bad english, I´ve an ask, need translate this setup

    Motor/engine 2.0 Litres

    potencia maxima 115,5 cv a 5600 rpm

    Torque maximo 17,6 kgm a 3600 rpm

    to "lenguage" of the tweak..

    I don´t know what put in Power and torque 1/2/3, please if somebody can help me I got so happy :)

    ReplyDelete
    Replies
    1. just play with the values till you get what specs you want

      Delete
  96. Having a problem with the .Net i have .NET 4 though it still refuses to work any ideas?

    ReplyDelete
  97. I downloaded it and it says one value is missing what should I do ????

    ReplyDelete
    Replies
    1. make sure you have the right version of lfs(0.6B) and your antivirus is not blocking it

      Delete
  98. He's working on version 6.0E?
    find somewhere unlocked?

    ReplyDelete
  99. Why does my tweak crash? it says Invalid argument value 146

    my op is: windows 8 pro 32-bit

    ReplyDelete
  100. I thing you write an unsupported values in one of the input boxes

    ReplyDelete
  101. i mean that when i start the tweak ie says like that its popping up a mirror

    ReplyDelete
  102. o.6b the newest you can have on lfs

    ReplyDelete
  103. Replies
    1. the tweak is for 0.6B...that is why it isn't working

      Delete
  104. so i need 0.6 e if its gonna work?

    ReplyDelete
  105. ************** Exception Text **************
    System.ArgumentOutOfRangeException: InvalidArgument=Value of '146' is not valid for 'SelectedIndex'.
    Parameter name: SelectedIndex
    at System.Windows.Forms.ComboBox.set_SelectedIndex(Int32 value)
    at LFS_Tweak.com_06B_Pro_Tweaker.Main.  ()
    at LFS_Tweak.com_06B_Pro_Tweaker.Main. (Object , EventArgs )
    at System.EventHandler.Invoke(Object sender, EventArgs e)
    at System.Windows.Forms.Form.OnLoad(EventArgs e)
    at System.Windows.Forms.Form.OnCreateControl()
    at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
    at System.Windows.Forms.Control.CreateControl()
    at System.Windows.Forms.Control.WmShowWindow(Message& m)
    at System.Windows.Forms.Control.WndProc(Message& m)
    at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
    at System.Windows.Forms.ContainerControl.WndProc(Message& m)
    at System.Windows.Forms.Form.WmShowWindow(Message& m)
    at System.Windows.Forms.Form.WndProc(Message& m)
    at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
    at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
    at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


    ************** Loaded Assemblies **************
    mscorlib
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
    ----------------------------------------
    LFS-Tweak.com 0.6B Pro Tweaker
    Assembly Version: 1.4.1.0
    Win32 Version: 1.4.1.0
    CodeBase: file:///C:/Users/Ramuno/Desktop/LFS-Tweak.com0.6BProTweaker/LFS-Tweak.com%200.6B%20Pro%20Tweaker.exe
    ----------------------------------------
    Microsoft.VisualBasic
    Assembly Version: 8.0.0.0
    Win32 Version: 8.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
    ----------------------------------------
    System
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    ----------------------------------------
    System.Windows.Forms
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
    ----------------------------------------
    System.Drawing
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
    ----------------------------------------
    System.Runtime.Remoting
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
    ----------------------------------------
    System.Configuration
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
    ----------------------------------------
    System.Xml
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll

    HELP ! :)

    ReplyDelete
  106. Can someone please tell me how i can make 1.9 TD engine with 1894ccm and 55kW, i don't know hot to set engine torque and power 1,2 and 3.

    ReplyDelete
  107. hi! tweak does not work there comes error text when i open it then the tweak open and its empty, there is just empty slots! how i can load the texts to empty slots? please help me! :-)

    ReplyDelete
  108. i have the same problem, the text slots appears empty, and when i open the tweak exe. an error appears on the screen, please help me..

    ReplyDelete
  109. Why not use IExpress 2.0 to make standlone file and install Microsoft Framwork 3.5 and at same time tweaker? More simple and less care.

    autoextration files look:
    http://www.thewindowsclub.com/iexpress-2-0-and-command-line-switches

    ReplyDelete
  110. can put above 18 cylinders it says lfs stop working.

    ReplyDelete
  111. InvalidArgument=Value of '146'

    Heelp!

    ReplyDelete
  112. InvalidArgument=Value of '146'

    HELP ME PLEASE

    ReplyDelete
  113. dude im going to fucking destroy my computer i JUST went out and bought the g27 so i could fucking play, bought s2 and now i cant even tweak the fucking game! i could a month or more back when i had the demo. what the fuck is going on im litteraly about to return the fucking wheel. email me preferabbly allthat_remains@live.ca

    ReplyDelete
  114. I have been getting an error, i have re-downloaded program and i have re-installed microsoft.net. It just appeared one day, i was using the program the night before just fine.

    See the end of this message for details on invoking
    just-in-time (JIT) debugging instead of this dialog box.

    ************** Exception Text **************
    System.IndexOutOfRangeException: Index was outside the bounds of the array.
    at LFS_Tweak.com_06B_Pro_Tweaker.Main.  ()
    at LFS_Tweak.com_06B_Pro_Tweaker.Main. (Object , EventArgs )
    at System.EventHandler.Invoke(Object sender, EventArgs e)
    at System.Windows.Forms.Form.OnLoad(EventArgs e)
    at System.Windows.Forms.Form.OnCreateControl()
    at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
    at System.Windows.Forms.Control.CreateControl()
    at System.Windows.Forms.Control.WmShowWindow(Message& m)
    at System.Windows.Forms.Control.WndProc(Message& m)
    at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
    at System.Windows.Forms.ContainerControl.WndProc(Message& m)
    at System.Windows.Forms.Form.WmShowWindow(Message& m)
    at System.Windows.Forms.Form.WndProc(Message& m)
    at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
    at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
    at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


    ************** Loaded Assemblies **************
    mscorlib
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4984 (win7RTMGDR.050727-4900)
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
    ----------------------------------------
    LFS-Tweak.com 0.6B Pro Tweaker
    Assembly Version: 1.4.1.0
    Win32 Version: 1.4.1.0
    CodeBase: file:///J:/LFSTweak%20.6b/LFS-Tweak.com%200.6B%20Pro%20Tweaker.exe
    ----------------------------------------
    Microsoft.VisualBasic
    Assembly Version: 8.0.0.0
    Win32 Version: 8.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
    ----------------------------------------
    System
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4985 (win7RTMGDR.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    ----------------------------------------
    System.Windows.Forms
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4985 (win7RTMGDR.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
    ----------------------------------------
    System.Drawing
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4985 (win7RTMGDR.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
    ----------------------------------------
    System.Runtime.Remoting
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
    ----------------------------------------
    System.Configuration
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
    ----------------------------------------
    System.Xml
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
    ----------------------------------------

    ************** JIT Debugging **************
    To enable just-in-time (JIT) debugging, the .config file for this
    application or computer (machine.config) must have the
    jitDebugging value set in the system.windows.forms section.
    The application must also be compiled with debugging
    enabled.

    For example:




    ReplyDelete
    Replies
    1. Same here, worked yesterday, and have done for years, but now suddely it fucked up! Please guys, give us an answer!!!

      Delete
  115. This comment has been removed by the author.

    ReplyDelete
  116. Same here.

    http://you-test.ch/ is down

    ReplyDelete
  117. That's why I couldn't connect! Was about to turbocharge my S2000/XRG only to find I couldn't start it up today :( Oh well, I'll play TERA for now.

    ReplyDelete
  118. The program must communicate with the Authors site, or at least some website. I know when my internet has dropped the program doesn't launch.

    I do hope the site comes back up and/or they can make an offline version that doesn't depend on a website to be active.

    ReplyDelete
  119. Disconnect from internet (pull ethernet plug or disconnect from wireless network) Then launch the program, you will not receive the erroc, then connect to internet again when program has successfully launched. I think the program only checks for the site if you are on the internet but does not when you are not.

    ReplyDelete
    Replies
    1. problem is, i want to play on the server. Game is getting boring being alone...

      Delete
    2. You just reconnect to the internet after the program has successfully launched while offline, you should be able to connect to a server.. (not sure if you are talking about a specific server or just in general, i don't really play multiplayer that much)

      Delete
  120. why says one value missing ??

    ReplyDelete
  121. anyone can tell me why i cat update values, says one value is missing ? :O

    ReplyDelete
  122. Disconnect from internet, then open program and when program has succesfully launched, connect to internet again so you can play multiplayer with tweak, i have tried this myself and it works.

    ReplyDelete
    Replies
    1. you are a GOD!!!!
      guys this works for that stupid error with the tweak...the one with value that is missing...just disconnect from the internet, launch the game, than launch the tweak...worked for me!

      Delete
  123. Hi,
    I have a problem. When turn on tweak shows me an error: you-test.ch
    I have LFS 0.6B
    Sorry for my English because I used translator. :)

    Pls Help!

    ReplyDelete
    Replies
    1. I have the same problem...You-test.ch?any solution for it?i relly would neet one!

      Delete
    2. How stupid are people that they don't read earlier posts? A sollution has been posted by someone, use your eyes.

      Delete
    3. but what happens when you reconnect to the internet

      Delete
  124. thanks guys, had the "you test" problem too tried all sorts reinstalled lfs and the re downloaded tweak no luck awesome work =)

    ReplyDelete
  125. Hi, i'm getting unhandled exception error... Got NetFramework 4, Win 7 64 bit.

    ReplyDelete
  126. Man it gives a error ....i used it beafore and it worked..now it blocks when i try to start it ...it says: unhandled exception has occured in your app ...microsoft.net framework then when i click ok it shows like always but it didn't show values in brackets:( how can i fix it

    ReplyDelete
    Replies
    1. I have the same exact issue. It used to run and now I too get that error... Help

      Delete
  127. READ THIS BEFORE WRITING A STUPID COMMENT ABOUT IT NOT WORKING!!!!

    1. Disconnect from the internet (unplug ethernet cable or dissconect from wireless network)
    2. Launch LFS and then launch the tweak, you will not get a warning.
    3. connect to the internet again if you want to play online, the tweak will work without any error.

    ReplyDelete
  128. did every thing right and still not working "invalidargument".

    ReplyDelete
  129. You are probably in 0.6E version and this tweak is for 0.6B that's what is causing your error.
    Are they going to make it compatible with the 0.6E version?

    ReplyDelete
  130. http://i.imgur.com/uF29c3Q.jpg I get this problem, what is it about? Im using 0.6B

    ReplyDelete
  131. Hi guys can anyone help me reach these values:
    DISPLACEMENT:
    1686 cm3
    POWER:
    74 KW(99bhp) @ 4400 RPM
    TORQUE:
    240 Nm(177 lb-ft) @ 2300 RPM
    Thank you!

    ReplyDelete
  132. the same problem with dots... i tried about 5 diferent 0.6b games, still the same problem

    ReplyDelete
  133. Can't Tweak the XRR for some reason ?

    ReplyDelete
  134. can you get banned by lfs for using tweak??

    ReplyDelete
  135. http://ch-slike.com/image/XzpR
    Whot is this?

    ReplyDelete
  136. YOU ARE NOT READING FROM LFS!
    WTFFF? O.o

    HELP MEE PLEASE
    USING 0.6E PRO TWEAKER

    ANSWER PLEASE!

    ReplyDelete
  137. can any body help me for the engine below?

    410nm @1500rpm
    204hp @4000rpm
    3.0L Inline 6 cyl

    ReplyDelete